Kromek D3S Static Node, Руководство пользователя

Страница: 5 / 28

MAL-OPS-0970 Version 1.0 Page 5 of 28
Introduction
The D3S Static Node is a unique radiation detection solution which incorporates
the Kromek D3S detector into a discreet, unattended device that can be mounted
onto urban infrastructure.
The D3S Static Node blends the high sensitivity of the D3S detector with an
additional electronics system which allows the stationary, unmanned device to
communicate with the SIGMA network via a 3G/4G connection. In the event of a
power outage, the device utilises battery power.
1 Regulations and Standards
Europe:
The product conforms with the relevant Community harmonisation legislation:
•
Radio Equipment Directive 2014/53/EU
•
Low Voltage Directive 2014/25/EU
•
Restriction of the use of certain hazardous substances directive
2011/65/EU
•
The WEEE Directive
2 Symbols
The following signal words and icons are used in this manual to indicate
precautions when using the D3S Static Node. The indicated precautions provide
information that is vital to safety. Always observe all precautionary information.
The signal words and icons are as follows:
WARNING
Indicates a potentially hazardous situation
which, if not avoided, will result in minor or
moderate injury, or may result in serious injury
or death. Additionally, there may be significant
property damage.