Kromek D3S Static Node, Руководство пользователя

Страница: 18 / 28

8.3 Command Bar (A)
Reload Configuration
– Reload the entire configuration by reading it off the
attached hardware device. Be aware reloading the configuration will lose all
unsaved changes to the devices’ configuration.
Save Changes
– Save all changes to the attached hardware device. Once
applied it cannot be undone.
Disconnect
– Disconnect from the device and return to the connection screen.
Note any unsaved changes will be lost.
Reboot Device
– Reboot the device. When the device is restarted you will
automatically be disconnected. Any unsaved changes will be lost on
disconnection.
Apply Software Update
– Apply a software update to the connected device from
a file.
8.4 Device Summary (B)
A summary of the currently connected device is always shown on screen:
•
IP Address
– The IP address of the device currently connected. This
will always be 10.0.0.1 when connecting via the Debug Port.
•
Sigma
– Status of the connection to the Sigma network. When
connected the device will automatically upload measurements to the
network.
•
Power
– Whether the device is currently running on external (mains) or
battery power including battery estimated charge %