GB-2
D
GB
F
NL
I
E
Checking the usage
Burner control units BCU 560, 565 and 580 are
designed to monitor and control gas burners in in-
termittent or continuous operation.
The outputs for controlling the burners, e.g. for fan,
actuator and valves, are activated via a replaceable
power module. All the parameters required for opera-
tion are saved on the integrated parameter chip card.
BCU 560, BCU 565
For directly ignited burners of unlimited capacity.
BCU 580
For pilot and main burners of unlimited capacity. Pilot
and main burners can be monitored independently.
BCU..F1, BCU..F, BCU..F
Burner control units with interfaces for air control
using an air valve or actuators IC 20, IC 40, RBW.
BCU 565..F1, BCU 565..F, BCU 565..F
With air flow monitoring as well as pre-ventilation
and post-ventilation to control and monitor a self-
recuperative burner.
This function is only guaranteed when used within the
specified limits – see page 26 (Technical data). Any
other use is considered as non-compliant.
Type code
Code
Description
BCU
Burner control unit
560
565
580
Series 560
Series 565
Series 580
Q
W
Mains voltage:
120 V AC, 50/60 Hz
230 V AC, 50/60 Hz
C0
C1
No valve proving system
With valve proving system
F0
F1
F2
F3
Capacity control:
none
with interface for actuator IC
with interface for RBW actuators
with air valve control
D0
D1
D2
With flame control
Operation on high temperature equipment
Operation with menox burner
K0
K1
K2
No connection plugs
Connection plugs with screw terminals
Connection plugs with spring force terminals
Part designations
3
5
2
6
8
1
7
4
1
LED display for program status and fault
messages
Reset/Information button
On/Off button
4
Type label
5
Connection for opto-adapter
6
Power module, replaceable
7
Power module type label
8
Parameter chip card, replaceable
Input voltage – see type label.
BCU
