GB-2
D
GB
F
NL
I
E
Checking the usage
JSAV
Safety shut-off valve for securing downstream fittings
against excess gas pressure.
This function is only guaranteed when used within
the specified limits – see page 7 (Technical data).
Any other use is considered as non-compliant.
Type code
Code
Description
JSAV
Safety shut-off valve
50 – 00
Nominal size
T
T-product
F
A
Flange to ISO 7005
ANSI flange
50
Inlet pressure p
u max.
= 5 bar (72.5 psig)
/
Over-pressure shut-off p
do
-0
No pressure test point
Part designations
1
10
5
7
8
6
9
3
4
2
Measuring unit
Screw plug with position indicator
Connection for impulse line (closed with plastic
plug)
4
Inlet
5
Outlet
6
Arrow of direction of flow
7
Reset
8
Arrow of direction of reset
9
Reset lever
0
Connection for breather line (closed with plastic
plug)
Type label
Max. inlet pressure, upper trip pressure p
do
, ambient
temperature: see type label.
D-49018 Osnabrück, Germany
JSAV
TS=
P
u
max:
Wh
o
:
p
do
:
AGo: +/- 10%
Installation
CAUTION
Please observe the following to ensure that the
JSAV is not damaged during installation:
– Sealing material, cuttings and other impurities
must not be allowed to get into the housing.
– We recommend installing a filter upstream of the
JSAV in order to protect it against impurities in
the pipe.
– The installation location must be dry. Do not
store or install the JSAV in the open air.
– Install the JSAV in the pipe free of mechanical
stress.
– Do not clamp the unit in a vice or use it as a
lever. Risk of external leakage.
– Max. inlet pressure p
u max.
5 bar (72.5 psig).
– Installation in the vertical or horizontal position,
never upside down.
The housing must not be in contact with ma-
sonry. Minimum clearance 20 mm (0.78"). Ensure
that there is sufficient space for installation and
adjustment.
Remove the adhesive foil from the inlet and outlet
on the JSAV.
Insert seal between pipe and unit.
▷
Note direction of flow.