Portable spectrum analyzer Arinst SSA-TG R2 6 April 2019
www.arinst.net | www.arinst.ru | www.kroks.ru
56
b) By directly entering the frequency range. To do this, click
Add frequency band
(figure 80), and in
the menu that opens, enter the
Start
and
Stop
frequency of the range, as shown in figure 82.
In our ex-
ample, the frequency range UMTS-FDD Downlink is introduced
. For inclusion in the list of the range of
input frequencies, click
Add
.
Figure 82
Input of the initial and final frequencies of the range
9.5.5. Go back to the
Frequency merges
menu and select the range list you created, as shown in
figure 83. In our example, the Downlink list. In the opened tab, in addition to the name of the list, a list
of frequency ranges is displayed.
igure 83 Created list of frequency ranges
