Portable spectrum analyzer Arinst SSA-TG R2 6 April 2019
www.arinst.net | www.arinst.ru | www.kroks.ru
43
8.10. Settings menu
8.10.1. From the main menu of the control program, enter the
Settings
menu, as shown in Figure 62.
Figure 62
Settings menu
8.10.2. To set the interface language, click on the
Language
button, and in the appeared window se-
lect the interface language of the control program, figure 63.
igure 63 Selecting the language of the control program interface
8.10.3. In addition to selecting the interface language, you can optionally change the display settings:
Show markers
– option enables or disables the display of markers;
Show regions
– displayed on the screen or disabled preset and designated frequency ranges;
V lines
and
H lines
– control the display of vertical and horizontal grid lines;
Rendering
– drawing data on the screen as lines or points;
StandBy in
– option sets the time interval after which the device enters the standby (energy saving)
mode.
