INSTALLATION
2
9
OPTIWAVE 7300 C
www.krohne.com
04/2009 - 4000050002 - QS OPTIWAVE 7300 R05 en
2.5 Transport
2.6 Pre-installation requirements
•
Make sure that there is adequate space on all sides.
•
Protect the signal converter from direct sunlight and install the weather protection accessory
if necessary.
•
Do not subject the signal converter to heavy vibrations. The devices are tested for vibration
and agree with EN 50178 and IEC 60068-2-6.
To make sure that you install the device quickly, easily and safely, prepare the installation as
given in the instructions that follow.
Figure 2-5: How to lift the device
1
Remove the converter before you lift the device with a hoist.
WARNING!
Lift the device carefully to prevent damage to the antenna.
INFORMATION!
The following precautions must be taken to make sure it is correctly installed.
QS_OPTIWAVE7300_en_090528_4000050002_R05_web.book Page 9 Friday, May 29, 2009 4:01 PM
