KROHNE OPTISYS CL 1100, Руководство пользователя

Страница: 24 / 48

5
OPERATION
24
OPTISYS CL 1100
www.krohne.com 03/2016 - 4002492302 - MA OPTISYS CL 1100 R03 en
After starting-up the signal converter, the measuring screen appears. This is the standard
screen which is displayed automatically in the normal operating mode. If you are in this mode
and you want to adjust the temperature compensation, you have to perform the following steps:
Step 1: activating the temperature compensation for measurement
Press
^ ^ ^ ^
several time until you reach the measuring mode again. Choose yes
yes yes
yes to safe and confirm
your selection.
Press >>>> for more than 2.5 seconds, then release the button. You are now on the main menu level. In the
upper line on the right side of the display "A" appears, beneath the main menu quick setup
quick setup quick setup
quick setup is highlighted.
Press or until the main menu setup setup setup setup is highlighted.
MAIN MENU
A quick setup
B test
> C setup
> C setup > C setup
> C setup
D service
Press >>>> to enter the chosen menu.
You are on the first submenu level. In the upper line of the display "setup" and "C1"
appears, beneath the submenu process input A
process input A process input A
process input A is highlighted.
Press >>>> to enter the chosen menu.
You are on the second submenu level. In the submenu parameter parameter parameter parameter
(Cl
2
/ClO
2
/O
3
) is highlighted.
Use or until the submenu temperature temperature temperature temperature is highlighted.
Press >>>> to enter the chosen menu.
You are on the parameter level. In the upper line of the display
"temperature" and "C1.15.1" appears, beneath the option probe probe probe probe is
highlighted.
Use or until the menu item temp. comp. temp. comp. temp. comp. temp. comp. is highlighted.
Press >>>> to enter the chosen menu.
Now you can set up the temperature compensation.
Press or to choose between on on on on and off off off off.
Press
^ ^ ^ ^
to confirm the entered value.
If you have chosen the option on on on on (linear), you can select the
temperature compensation now.
Press or until menu item temp.coefficient temp.coefficient temp.coefficient temp.coefficient is highlighted.
Enter the value and press
^
^ ^
^
to confirm the value.
Press or to choose probe
probe probe
probe.
Press >>>> to enter the chosen menu.
Press or to choose between Pt1000, Pt100 or
manual.
Press
^ ^ ^ ^
to confirm the entered value.