INSTALLATION
2
5
OPTISONIC 6300
www.krohne.com
06/2019 - 4005857501 - QS OPTISONIC 6300 v2 R01 en
2.1 Intended use
The OPTISONIC 6300
OPTISONIC 6300
OPTISONIC 6300
OPTISONIC 6300 is designed exclusively for bi-directional measurements on conductive and
/ or non-conductive fluids. Excess of contaminations (gas, particles, 2 phases) disturb the
acoustic signal and thus must be avoided.
The overall functionality of the OPTISONIC 6300
OPTISONIC 6300
OPTISONIC 6300
OPTISONIC 6300 flowmeter, is the continuous measurement of
actual volume flow, mass flow, flow speed, velocity of sound, gain, SNR, totalized flow mass and
diagnosis values.
2.2 Scope of delivery
The underneath accessories can be ordered optionally:
•
GDC interface set
•
Coupling grease; mineral (standard versions) or high-temperature contact (XT versions)
•
Coupling pads
CAUTION!
Responsibility for the use of the measuring devices with regard to suitability, intended use and
corrosion resistance of the used materials against the measured fluid lies solely with the
operator.
INFORMATION!
The manufacturer is not liable for any damage resulting from improper use or use for other than
the intended purpose.
INFORMATION!
Do a check of the packing list to make sure that you have all the elements given in the order.
INFORMATION!
Inspect the packaging carefully for damages or signs of rough handling. Report damage to the
carrier and to the local office of the manufacturer.
INFORMATION!
The field device will arrive in two cartons. One carton contains the converter and one carton
contains the sensor.
INFORMATION!
Make sure to combine the sensor and the converter correctly, so they match by the devices
serial number.
