START-UP
4
13
OPTICHECK
www.krohne.com
06/2014 - 4003706601 - QS OPTICHECK R01 en
Support (on how to connect the flowmeter), will be shown in the window ( by hovering and
selecting the possibilities), and displayed on the right side of the window
2
. The OPTICHECK
software application will show the necessary information for the user, to connect the flowmeter
selected.
1. Message and action to follow
2. Support on connecting GDC
4.4 System ready
After connection of the flowmeter with the OPTICHECK verification tool, and the system checkup,
both "ready" messages will follow for OPTICHECK and flowmeter. All information will be shown
in the window (eg. ID, name, SW - ER version, calibration and manufacturing date). The system is
now ready to be configured for verification measurements see information refer to
Overview
verification process
on page 14
1. Ready messages with detailed info
2. Illustration of the flowmeter (recognized)
Note; if no illustration is shown, then the connected device (flowmeter) is not supported by the
OPTICHECK.
Start window: connection support
Figure 4-2: Connection support
Start window: OPTICHECK and Flowmeter ready
Figure 4-3: OPTICHECK and Flowmeter ready
