KROHNE MagCheck, Руководство пользователя, Страница: 13 / 32

MagCheck 13
3.2 Automatic verification with KROHNE IMoCom converters
3.2.1 How to start verification
Menu Explanation Display Details
1.0 Operation
→
Next screen 1.1 Test MID Starts automatic verification of flowmeter with
KROHNE IMoCom. All data will be verified and
stored in MagCheck.
→
inputs xx/70: Number of stored verification files (e.g.
11/70), not transferred to the PC before. A total of
70 files can be stored. In this example 59
verifications can be made before memory is full.
date Enter actual date (DD/MM/YY). This will allow PC
program to correctly assort verifications in trend
analysis. Attention: No plausibility check! Check
carefully!
↵
Next screen
tag number All signs on the MagCheck keyboard may be used
for entering the tag number. Method is the same
as typing an SMS on a cell phone.
Entered Tag Number will be used as identifier at
download into PC. You may use up to 16
characters.
↵
Next screen measurement Test conditions must be defined
pipe full filled with liquid
Electrode resistance will be tested via liquid.
With empty pipe the measured electrode
resistance will not comply with full pipe specs.
Result: Error statement in verification certificate
pipe empty empty, clean, dry pipe
Electrodes will be tested for insulation. With a full,
wet or contaminated pipe, the measured electrode
resistance will not comply with empty pipe
specifications. Result: Error Message in
verification certificate
no pipe Converter verification only
No verification of flow tube.
(Select acc.
to test /
process
conditions
using
↑↓
.
This will
allow
MagCheck to
select the
correct
verification
program)
Process
liquid Enter type, other data
↵
Next screen name user Enter name of MagCheck operator
↵
start? Select "back" or "yes"
back Will allow you to step back and check and correct
all data as entered above.
1.1
Test MID
(Select by
↑↓
)
yes
Selecting yes and pressing
↵
will start automatic
verification run.
↵