6
OPERATION OF INDICATOR M10
32
BW25
www.krohne.com
10/2008 • 4000432301 MA BW25 R01 en
6.3.3 Changing the settings in the menu
Starting operation
Starting operation
Starting operation
Starting operation
Operation is started using the key
If a different key is pressed, it is necessary to wait 5 seconds before activating the key.
If an operation inhibit has been set, the code
^
^
^
↑
↑
↑
has to be entered. If no key is
pressed within 5 seconds, code input is exited.
Exiting operator input
Exiting operator input
Exiting operator input
Exiting operator input
Operation is exited by pressing the
^
key several times.
Example: changing the default parameter from m
m
m
m to cm
cm
cm
cm
6.3.4 Measures in the event of faulty indications
If the indications on the display or the responses to keypad commands are faulty, you have to do
a hardware reset. Switch the power supply OFF and ON again.
If data have been changed:
Save Yes
Changes are accepted. An update is carried out and the indicator jumps back to
measuring operation.
Save No
^
Changes are discarded and the indicator jumps back to measuring operation.
CAUTION!
Each time parameters or settings are changed, the flowmeter carries out an internal plausibility
check.
If implausible inputs have been made, the indicator remains in the current menu, and the
changes are not accepted.
Indicator
Indicator
Example:
5.0
m
1x
Fct. 3.13.1111
LEVEL
1x
Fct.1....0
OPERATION
1x
5.0000
m
2x
↑
Fct. 3333.0
INSTALLATION
6x
↑
500
cm
1x
Fct 3.1111
LANGUAGE
1x
^
^
^
^
Quit Yes
12x
↑
Fct 3.13
13
13
13
END&UNIT
3x
^
^
^
^
500
cm
MA_BW25_R01_en_PRT.book Page 32 Thursday, October 30, 2008 3:49 PM
