1.
e supply voltage required for correct operation of the drive: 230V ± 10%.
Otherwise the drive may not work properly
2.
Use a connector designed to control the blinds.
3.
Upon setting the end positions, connect the white wire for programming with the neutral wire
of the power supply network.
DRIVE FUNCTIONS
IMPORTANT
4. AUTOMATIC ADJUSTMENT OF THE END UP/DOWN POSITION
UP button x1
Lower position =
Lower end position
Lower
position
Kiedy roleta znajdzie się w dolnym położeniu,
a napęd wyczuje opór — zatrzyma się i ruszy
w kierunku przeciwnym, wykonując cykl kontrolny.
e end positions
have been set when
the actuator stops
in the upper position.
e end position
setting process is
complete. Check
that the items have
been saved.
Upper position
When the roller shutter reaches
the upper position, and the drive
senses resistance, stop and move
to the opposite direction.
Turn on the
power switch.
Up
OK
Upper position
Upper end position
Lower end
position
Approx 1-3cm
Down
Program
Up
OFF
ON
3.
Down
Program
Up
Down
Program
Up
SETTING THE END POSITION BY MEANS OF THE PROGRAMMER
Fuse
DOWN button x1
Down
Drive stop in
lower position
OK
Settings button x1
UP button x1
Settings button x1
or
upper end
position
(each position)
Lower end
position
(each position)
Drive stop in
upper position
Up
or
Down
Program
Up
Down
Program
Up
1.
2.
OFF
ON
