[Stop button UP button ] x3
7. CHOICE OF REACTION TO OBSTACLES
UP button x1
DOWN button x1
Upper end
position
Lower end
position
Drive moves to the
upper end position.
Drive moves to the
upper end position.
Should be held for 0.5 seconds.
[Stop button UP button ] x3
Should be held for 0.5 seconds.
< 0.5s
OK
Down
Program
Up
Down
Program
Up
Down
Program
Up
Down
Program
Up
Down
Program
Up
Down
Program
Up
8. OPERATING MODE SELECTION OF OBSTACLE DETECTION
IMPORTANT!
e drive is factory
set to mode 1.
Make sure the up or switch
button on the program
selector is pressed.
No detection of
obstacles and
overload about
20 cm
No detection of
obstacles
and overload
about 4 cm
Obstacle detection
and overload work
in normal mode
Obstacle detection
and overload work
in normal mode
1st mode
Upper
end
position
Upper
end position
Obstacle detection
and overload work
in normal mode
Upper
end
position
3rd mode
2nd mode
In 1 sequence, the drive will
execute one up / down sequence.
In sequence 2, the drive will
execute two up / down sequences.
In sequence 3, the drive will
execute three up / down sequences.
Press and hold the
setting button.
Turn off the power.
Turn off
the power
or
or
Confirmation and change of drive mode.
OK
Down
Program
Up
OFF
ON
OFF
ON
Down
Program
Up
