9
5.3 Fuselage
The installation of the internal equipment of the fuselage of the model is very individual, it depends
on the habits of the builder, but especially on the equipment used, consider the following lines as
informative, what the internal installation of the fuselage may look like.
The model comes standard with a number of accessories that you can use:
- Exhaust holder
- Tank holder
- Battery holders
5.3.1 Rudder drive linkage
We recommend to use 2 standard servos mounted in the already glued deck to drive the rudder. The
rear (end servo) is equipped Secraft double sided offset arm 90 mm, the front servo is equipped with
a Secraft double side straightde arm 64 mm, the arms are interconnected by linkages formed by ball
links Secraft and pushrods 70 mm. Than the drive itself is solved by a pull-pull drive using a
Secraft Rudder pull-pull set BASE or SPORT.
