14
cover before final tightening.
The last operation is to put on the cover of the landing gear leg, the cover should be fixed to the
fuselage with a strip of transparent adhesive tape.
5.4.2 Tail wheel assembly
We recommend using our tail wheel 2010300-81 Tail wheel 35% with leg of C / F V2 for the model.
Attach the tail wheel to the tail of the fuselage on a designated area, which is reinforced inside with
plywood. Use 2 pieces of M4x20 screws to mount tail wheel, secure the M4 nut inside the fuselage.
Drill 4 mm diameter holes into the CF leg of tail wheel as shown.
Place the tailwheel leg to the surface on the fuselage as shown and drill the fuselage with tail wheel
leg.
Notice:
The last pieces of the ULTIMATE 300KS Mk2 models already have pre-drilled holes in the tail
section for attaching the tail wheel and nuts installed inside the fuselage to easy assembly.
