2
5.4.2
Tail wheel ...................................................................................................14
5.5
Cowling .....................................................................................................................15
1. Technical data:
Wingspan
2330 mm
Length
2550 mm
Weight (RTF)
15 kg
Wing area
160 dm2
Wing loading
93,75g/dm2
Engine (Gas)
100-130ccm
Minimum RC channels
6
Notice: This Assembly guide only shows how the model could be assembled. According to
model specification we expect, that this airplane is assembled by experienced user, which will
use his habbits and skills to finish it.
As an accesories (levers, rods, fuel caps and fills, etc.) we recommend Secraft. Sets which you can
order as order number:
2051000-50 for Hitec servos
2051000-51 for Futaba servos
2051000-52 for JR servos.
Here is list of Secraft parts for linkage:
Servo arm D40 mm (for aileron and elevator)
6
Double servo arm Offset D90mm (for rudder)
1
Double servo arm D64mm (for rudder)
1
SEC Ball links M3 (10)
1
SEC M3 Push rod of ALU 60 mm (for elevator)
1
SEC M3 Push rod of ALU 70 mm (for aileron
and rudder)
3
For rudder is higly recommended SECRAFT rudder pull-pull set BASE No.: 2050130-01
or SPORT set No.: 2010130-02
2. General informations
all nuts should be secured against looseninig (use Loctite 243)
make sure, that all control surfaces can move freely
all holes drilled in airplane surfaces, that is not factory made, must be reinforced (with
rowing, plywood, etc.)
