Rev. Date: 12/20/21
Page 9
At all times keep your hands, clothing, foreign objects, etc. away from inlet and discharge of your gas vacuum.
Never operate vacuum without hoses attached.
Note: The end user should perform a risk assessment when first using this equipment. The end user has
knowledge of conditions the equipment is used in. Therefore, the end user can ensure that necessary
control measures be implemented before equipment use. (Follow all local, state, federal, and/or DSEAR
requirements.)
Machine Start-up
1.) Place vacuum on level surface outside where the engine can receive fresh air
and expel hot exhaust.
2.) Hook up hoses to the inlet and discharge, secure with clamps before operation.
3.) Move choke control to choke position.
4.) Move throttle control to fast position.
5.) Turn fuel shut-off valve on.
6.) Turn key to start position (repeat until engine starts).
7.) Move choke control to off position after start up.
8.) Move throttle to appropriate operating speed.
Machine Shutdown
1.) Allow plenty of time for insulation hose to empty.
2.) Move throttle control to slow position (give the fan time to slow down).
3.) Let engine cool down for 2 minutes before shutting off.
4.) Turn key to off position and remove from switch.
5.) Close fuel shut-off valve.
Note: If fuel shut-off valve is not closed,
leakage may occur especially when transporting unit.
See engine operation
manual for additional
starting and stopping
instructions.
(Illust. D)