2
WARRANTY EXTENDED ONLY TO ORIGINAL PURCHASER
WARRANTY AND RETURNED GOODS PROCEDURES:
When returning blower to the manufacturer for repair, first obtain a return goods authorization number
(RGA#), and you will be given shipping instructions. All blowers or parts must be returned prepaid with
necessary information as to date of purchase, model, and serial number with description of the problem and
defect. The blower must be shipped PREPAID to:
Krendl Machine Co.
1201 Spencerville Ave.
Delphos, OH 45833 USA
Phone: 419-692-3060
Fax: 419-695-9301
www.krendlmachine.com
IF BLOWER WAS NOT PURCHASED DIRECTLY FROM KRENDL MACHINE CO., CONTACT
YOUR SUPPLIER.
Once blower is received, it will be inspected. In-warranty blowers will be repaired and returned
immediately. Estimates of repair and charges will be provided for out-of-warranty units.
CAUTION/SAFETY: FAILURE TO OBSERVE WARNINGS
BELOW MAY RESULT IN DANGER TO OPERATOR
.
•
Never operate blower unless properly and securely mounted to machine. Strong suction can pull
fingers or clothing into dangerous blades. Blower connects to insulation machine by a twist-lock
adapter, 2-3/8”.
•
Ground properly with a three-wire cord in a grounded electrical outlet.
•
Keep away from moisture.
•
Do not operate when flammable and/or explosive vapors or dust are present.
•
Disconnect cord from electrical outlet before attempting any electrical or mechanical service.
•
Authorized personnel must perform electrical service.
OPERATING INSTRUCTIONS: READ ALL INSTRUCTIONS
BEFORE YOU BEGIN.
A.
This blower is an integral part of a cellulose blowing system. Connect blower to the insulation
machine using the twist-lock adapter provided on the base of the machine. In many cases, the
blower electrical connection will be through a remote control unit. Plug blower into receptacle
marked “blower outlet”. The blower will have an on-off switch, governed by the remote control
unit; it cannot control blower unless blower switch is in “on” position.
B.
Connect insulation hose directly to the blower outlet with appropriate size hose and hose clamp.
