KREMLIN REXSON
Page 11
Manual : 573.191.112
The air connection of the machine is Female 1/4 G (air inlet = R1 and air outlet = R2).
The connection between the control bay and the fluid module is carried out via the provided cable,
length 1.8 m / 6 ft , a cable, length 7 m / 23 ft is also available (option). For lengths up to 7 m / 23 ft
connect the cables between them (male-female).
A valve fitted with fittings is supplied with the machine. It will be mounted on the gun air inlet : it enables
to shut off quickly the fan air (priming, flushing stage).
Connection of the fluid inlets :
The fluid inlets are M 1/2 JIC.
Â
We advice you to install AIRMIX
filters on the fluid inlets (catalyst
and base).
The base(s) and the base solvent are
connected on the color changer installed
on the machine.
The catalyst is connected :
- directly on the elbow installed before
the non-return valve,
- or on the color changer (cata and cata
solvent) installed in the machine.
It depends upon the configuration of the
machine.
The air connection is made on the two
G 1/4 connecting parts.
Assemble filters at the outlet of the BASE and CATA pumps.
Assemble pressure regulators at the outlet of the BASE and CATA pumps.
Install the fluid and air hoses between the pumps and the CYCLOMIX
TM
MICRO, and between the
CYCLOMIX
TM
MICRO and the gun. When choosing the fluid hoses, comply with the pressures delivered
by the pumps. For the air hoses, install
non-static
hoses.
Unscrew the regulators before supplying air to the installation.
Check that the three way-valve is in the IN fluid circuit sense and not in the TA circuit sense.
Catalyst
Base(s) and solvent
base
Air inlet / outlet
