Main Menu, Navigation and Setup Cont...
33
S-1200/ 1200U
5. DTS Control Trim
DTS NEO surround modes take a 2 channel audio input and create 5.1 surround channels. DTS
control trim allows a permanent fine adjustment of the center channel gain, as opposed to the main
center levels set in speaker setup. These adjustments do not change the main settings. The DTS
control trim adjustment range is from 0 dB to +5dB in 1dB increments.
6. PL11 Control Trim
Dolby Pro Logic surround modes take a 2 channel audio input and create 5.1 surround channels.
PL11 control trim allows a permanent fine adjustment of center channel spread to the left and right
speakers and also the amount of fade from front speaker to surround speakers. The two available
adjustments are Center Width and Dimension.
Center Width - Adjust how much of the center output signal is dispersed to the left and right
channel outputs. The adjustment range is from 0 (lowest) to 7 (highest, effectively mutes the center
channel) in 1 dB increments.
Dimension - Adjust the fade balance between the front or rear loudspeakers, to customize
the balance from all loudspeakers. The adjustment range is from 0 (Maximum surround) to 6
(Maximum front). The default setting is 4 (neutral) and adjustable in 1 dB increments.
7. Maximum Volume Limit
Adjusts the maximum system volume control limit. The maximum volume setting range is from 10
to 152. NOTE: The default maximum volume limit setting is 100.
