CHANNEL SELECTION
System Configuration,
continued
Step 4, Operation
SAVING ROOM EQ SETUP
MEMORY
USING ROOM EQ SETUP IN
THE OPERATIONAL MODE
When the channel field is set to
ALL,
the
ROOM EQ SETUP
menu displays
the filter settings which apply to all channels and all of the channels
are filtered in the same manner. When the channel parameter selec-
tion is set to only one of the channels (L, C, R, LS, RS, LB, RB, S),
the filter settings apply to each of the channels individually.
There are four selectable memories associated with the
ROOM EQ
SETUP
menu. Values are saved automatically when you enter a selec-
tion.
Room EQ settings are stored in the S–1000 memory in the same
manner as all of the other software settings, for example the selec-
tions for loudspeaker setup and device configuration.
See
Saving
and Recalling Customized Settings and Restoring the Factory
Default System Settings,
on page 57, for more information.
When the S–1000 is in the operational mode, access the saved EQ
configurations by pressing the right directional key (33) on the
remote. Use the up and down directional keys (26) to scan through
the four memories and
OFF
.
54
Krell S–1000
The selection
ALL
overrides individually configured channels.
IMPORTANT
APPLYING YOUR
CONFIGURATIONS
Your configurations take effect only when you press enter in the
APPLY
field.
APPLY
allows you to hear the effect of the selections you
have made without leaving the menu, if you have a source device
playing.
HOW TO NAVIGATE
IN THE MENU MODE
1 Press the menu key (29) to enter and
exit the menu mode from the
operational mode.
2 Press the direction keys (33) to scroll
from line to line, and to scroll through
options within a line.
3 Press the enter key (32) to select and
set an option.
4
Use the directional keys to scroll to
the next line.
5
Press the prev key (30) to return to the
previous screen.
6 Press the pre key (1) to exit the menu
mode and place the S–1000 in the
stand-by mode.
