manualshive.com logo in svg

Krell Industries S-1000, Инструкция по эксплуатации, Страница: 48 / 72

Поделиться
Скачать
Krell Industries S-1000 Скачать руководство пользователя страница 48

44

Krell S–1000

Use the 

DTS CONTROL

menu to adjust the signal for DTS Neo:6 music

mode. The center gain adjusts the amount of center channel infor-
mation present in the left and right loudspeakers. The adjustment
range is 0 (no center channel information subtracted (wide sound
field) to 5 (maximum level of center channel information subtracted
from the left and right channels (focused sound field).

Select 

DTS CONTROL TRIM

from the configure levels menu. The 

DTS

CONTROL 

screen appears:

After setting the selection, press the previous key (30) once to return
to the 

CONFIGURE LEVELS 

screen.

DTS Neo:6 music mode derives a 6.0 signal from two-channel material. For
more information on DTS Neo:6 Modes, see

User Selectable Modes

on

page 61.

System Configuration, 

continued    

Step 3, Configure Level Adjustment    

DTS Control Screen

DTS Control

HOW TO NAVIGATE 
IN THE MENU MODE

1 Press the menu key (29) to enter and 

exit the menu mode from the  

operational mode.

2 Press the direction keys (33) to scroll 

from line to line, and to scroll through 

options within a line. 

3 Press the enter key (32) to select and 

set an option.

4

Use the directional keys to scroll to 

the next line.

5

Press the prev key (30) to return to the 

previous screen.

6 Press the pre key (1) to exit the menu 

mode and place the S–1000 in the 

stand-by mode.

Prev

Note

Содержание S-1000









































































Отзывы:

Нет отзывов