22
SECTION
FOUR
Connecting a LAT Series Loudspeaker
to Your System
To connect the loudspeaker to your system:
1.
Make sure that all power sources and components are off before connecting
system components.
2.
Neatly organize wiring between all system components. Separate AC wires
from audio cables to prevent hum or other unwanted noise from being intro-
duced into the system.
3.
Locate the loudspeaker binding posts on the LAT back panel.
4.
Connect the loudspeaker cable from the positive binding post on the LAT to
the positive channel output on the amplifier. Connect the loudspeaker cable
from the negative binding post on the LAT to the negative channel output on
the amplifier.
IMPORTANT
Do not disconnect signal cables when the amplifier is on and connected to the
loudspeaker. Doing so will cause a loud pop that may damage your components.
Tighten loudspeaker binding posts by hand only.
