continued
7
Unpacking and Placement
This section describes the procedures for safely unpacking and placing your Lossless
Acoustic Transducers.
Opening the LAT–1 and the LAT– C Shipping Crate
The LAT–1.
Each LAT–1 shipping crate measures 24 in. (61 cm) wide by 61 in.
(155 cm) high by 24 in. (61 cm) deep and contains one LAT–1. The combined
weight of the crate and loudspeaker is approximately 340 lbs. (155 kg). Each
LAT–1 loudspeaker measures 12.5 in. (31.8 cm) wide by 54.6 in. (138.7 cm) high
by 14 in. (35.6 cm) deep with an estimated weight of 270 lbs. (122.7 kg).
The LAT–C. Each LAT–C shipping crate measures 44.8 in. (113.8 cm) wide by 28 in.
(71.1 cm) high by 23.25 in. (59 cm) deep. The combined weight of the crate and
loudspeaker is approximately 300 lbs. (136.4 kg). Each LAT–C loudspeaker mea-
sures 40.9 in. (103) cm wide by 12 in. (30.48 cm) high by 15 in. (38.1 cm) deep with
an estimated weight of 200 lbs. (90.9 kg).
Krell recommends that you have three to four people to safely move the loudspeaker
to its place in the listening area. Two people are needed to remove the shipping
crate top from its base.
The shipping crate is specially designed to open safely and easily. The LAT–1 is
enclosed in a protective sleeve and rests on the reinforced base of the crate, and
the crate top is fastened to the base with Phillips-head screws. The only tool you
need to remove the LAT from the crate is a Phillips screwdriver. See the steps
below to unpack the LAT.
To Remove the LAT–1 or LAT–C from the Shipping Crate
1.
Locate the screws on the base of the shipping crate (two on each end and
three on each side). These screws are circled with black marker for easy
identification.
2.
Completely remove all screws.
1 person needed
SECTION
TWO
