continued
Menu Functions
AC Mains
This function enables you to operate the Evolution Two from a switched AC outlet.
If AC Mains is set to
ON,
the preamplifier turns on immediately, by-passing stand-
by. Thereafter, you may switch the preamplifier to and from stand-by, using the
power button or pwr key (3). The options are:
OFF, ON.
Enter the menu, then:
1.
Use the level control knob on the preamplifier chassis front panel or up and
down keys (16) on the remote control to select:
AC MAINS.
2.
Press the enter button on the preamplifier chassis front panel or the enter key (18)
on the remote control
.
The front panel display (15) shows the default mode:
OFF
.
3.
Use the level control knob or the up and down keys to select the desired
option:
OFF
or
ON.
4.
Press the enter button or key to confirm the selection. The front panel display
reads:
AC MAINS.
OFF
The Evolution Two switches to stand-by mode, when it detects AC power.
ON
The Evolution Two turns on immediately, bypassing the stand-by mode, when it
detects AC power.
Backlight
This function enables you to control the blue power indicator brightness. The
options are:
OFF, LOW (25%), MED (50%), HIGH (100%).
Enter the menu, then:
1.
Use the level control knob on the preamplifier chassis front panel or up and
down keys (16) on the remote control to select:
BACKLIGHT.
2.
Press the enter button on the preamplifier chassis front panel or the enter key
(18) on the remote control
.
The front panel display (15) reads:
BRIGHTNESS
.
3.
Press the enter button or the enter key again
.
The front panel display shows
the default mode:
HIGH
.
4.
Use the level control knob or the up and down keys to select the desired
brightness:
OFF, LOW, MED, HIGH
.
5.
Press the enter button or key to confirm the selection. The front panel display
reads:
BRIGHTNESS.
33
