background image

21

Compact Disc and DVD Functions

The compact disc and DVD dual-purpose keys of the remote control are function-

al with all Krell compact disc and DVD players.

D Transport Keys:

Pause Key

Use this key to temporarily suspend playing the current compact disc track.

Press pause again or press the play key, to resume playing the track at the

point when pause was engaged.

Play Key

Use this key to begin compact disc playback.

Stop Key

Use this key to end compact disc playback.

Track Forward and Back Keys

Use these keys to select and begin playing the track that follows or precedes

the current track.

Search Forward and Back Keys

Press and hold these keys to scroll forward or backward through the current

track.

E Menu Key

Use this key to enter CD or DVD player menus.

F Direction Keys

Use these keys to navigate CD and DVD menus.

G Select Key

Use this keys to make selections from CD and DVD menus.

H CD Key

Use this to activate CD functions.

I DVD Key

Use this to activate DVD functions.

J Title Key

Use this with CD or DVD player menus.

Note

For information on track programming functions, refer to the owner's reference of your

Krell compact disc player

.

continued

Содержание EVOLUTION 222

















































Отзывы: