Krautzberger A 10, Руководство по эксплуатации

Страница: 21 / 44

6.3 Adjusting the spray pattern
Fig. 7: Adjusting the spray pattern
1. Open the adjusting nut (Fig. 7/3) of the needle stroke adjustment maximum 5.5 mm (Fig. 7).
To do so, turn the adjusting nut (Fig. 7/3) counter-clockwise.
2. Completely close the flat jet regulator (Fig. 7/1).
3. Completely open the round jet control (Fig. 7/2).
Do not close the round jet regulator (Fig. 7/2) completely during operation.
4. Adjust the flat jet on the flat jet regulator (Fig. 7/1).
5. Continue adjusting settings on the regulators (Fig. 7/1 and 2) until the desired spray pattern
is achieved.
It is recommended that you only adjust the spray pattern with the regulators (Fig. 7/1
and 2). The fluid quantity should only be changed if the desired spray pattern cannot
be adjusted with the regulators (Fig. 7/1 and 2). A limited fine adjustment, e.g. for the
adjustment of several spray guns in a system, can be made using the adjustment nut
(Fig. 7/3).
Automatic spray gun A-10
ENGLISH
■ 200-0148 GB–21