12
8970
KRAUSMANN POWER TOOLS
English |
EN
tool for operations different from intended
could result in a hazardous situation.
Have your power tool serviced by a
qualified repair person using only genuine
replacement parts. This will ensure that the
safety of the power tool is maintained.
Follow instruction for lubricating and chang
-
ing accessories.
K
eep handles dry, clean and free from oil
and grease.
Service
3. Specific safety regulations
Wear ear protectors. Exposure to noise can
cause hearing loss.
Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
H
old power tools by insulated gripping sur
-
faces when performing an operation where
the cutting tool may contact hidden wiring
or its own cord. Contact with a “live” wire will
make exposed metal parts of the tool “live”
and shock the operator.
W
ear a hard hat (safety helmet), safety
glasses and/or face shield. Ordinary eye or
sun glasses are NOT safety glasses. It is also
highly recommended that you wear a dust
mask and thickly padded gloves.
Βe sure the bit is secured in place before
operation.
Under normal operation, the tool is designed
to produce vibration. The screws can
come loose easily, causing a breakdown or
accident. Check tightness of screws carefully
before operation.
I
n cold weather or when the tool has not
been used for a long time, let the tool warm
up for a while by operating it under no load.
This will loosen up the lubrication.
Always be sure you have a firm footing. Be
sure no one is below when using the tool in
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adher
-
ence to electric power tools’ safety rules. If you
use this tool unsafely or incorrectly, you can suffer
serious personal injury.
12
14
13
5
6
10
11
7
8
9
1
2
3
4
high locations.
H
old the tool firmly with both hands.
Κeep hands away from moving parts.
Do not leave the tool running. Operate the
tool only when hand-held.
Do not point the tool at any one in the area
when operating. Parts could fly out and injure
somenone seriously.
Do not touch parts close to the bit immedi
-
ately after operation; they may be extremely
hot and could burn your skin.
Some material contains chemicals which
may be toxic. Take caution to prevent dust
inhalation and skin contact. Follow material
supplier safety data.
Additional safety regulations for
angle polishers
Do not use accessories other than the polish
-
ing plates.
M
ake sure the buffing disc has the right
dimension and fits properly onto the tool.
M
ake sure the polishing plate matches the
dimension of the buffing disc.
I
nspect the buffing disc before use. Do not
use broken or damaged buffing discs.
M
ake sure the buffing disc and polishing
plate are installed according to the instruc
-
tions.
After fitting the buffing disc and polishing
plate, operate the machine for a while under
no load, in a safe place. If the machine
produces intense vibrations or you notice
any damage to the buffing disc, turn off the
machine immediately and try to identify the
cause.
I
f the machine produces intense vibrations or
you notice damage on the disc, turn off the
machine immediately and try to identify the
cause.
Do not use adjusters or other aids to fit a
buffing disc with a different axle diameter.
Turn the machine on and off only when
keeping it on the surface you intend to work
on.
Use only limited amount of polishing paste.
Use of excessive paste might make the pol
-
