KRAUSMANN 8352, Руководство по эксплуатации

Страница: 14 / 20

14
8352 KRAUSMANN POWER TOOLS
English | EN
21
22
20
19
18
17
16
15
14
13
8
9
7
6
5
4
3
2
10
23
11
12
ment parts. This will ensure that the safety of
the power tool is maintained.
Follow instruction for lubricating and chang-
ing accessories.
Kee p handles dry, clean and free from oil
and grease.
3. Specific safety regulations
Wear ear protectors. Exposure to noise can
cause hearing loss.
Hold power tools by insulated gripping sur-
faces when performing an operation where
the cutting tool may contact hidden wiring
or its own cord. Contact with a “live” wire will
make exposed metal parts of the tool “live”
and shock the operator.
Wear a hard hat (safety helmet), safety
glasses and/or face shield. Ordinary eye or
sun glasses are NOT safety glasses. It is also
highly recommended that you wear a dust
mask and thickly padded gloves.
Βe sure the bit is secured in place before
operation.
Under normal operation, the tool is designed
to produce vibration. The screws can
come loose easily, causing a breakdown or
accident. Check tightness of screws carefully
before operation.
In cold weather or when the tool has not
been used for a long time, let the tool warm
up for a while by operating it under no load.
This will loosen up the lubrication.
Always be sure you have a firm footing. Be
sure no one is below when using the tool in
high locations.
Hold the tool firmly with both hands.
Κeep hands away from moving parts.
Do not leave the tool running. Operate the
tool only when hand-held.
Do not point the tool at any one in the area
when operating. Parts could fly out and injure
somenone seriously.
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to electric power tools’ safety rules. If you use this
tool unsafely or incorrectly, you can suffer serious
personal injury.
1
Do not touch parts close to the bit immedi-
ately after operation; they may be extremely
hot and could burn your skin.
Some material contains chemicals which
may be toxic. Take caution to prevent dust
inhalation and skin contact. Follow material
supplier safety data.
Fully unwind cable drum extensions to avoid
potential overheating. When an extension
cable is required, you must ensure that it has
the right ampere rating for your power tool
and is in safe electrical condition.
If possible, always use clamps or a vice to
hold your work.
Do not put pressure on the tool, such that
it slows the motor down. Allow the bit to
operate without pressure. You will get better
results and you will be taking better care of
your tool.
Never use your hands to remove sawdust,
chips or waste close by the bit. Rags, cloths,
cord, string and the like should never be left
around the work area.
If you are interrupted when operating the
tool, complete the process and switch off
before looking up.
Periodically check that all nuts, bolts and
other fixings are properly tightened.
If in doubt, do not plug in the tool. Using a
power source with a voltage less than the
nameplate rating is harmful to the motor.
T he t o ol must be used only for its prescribed
purpose. Any use other than those men-
tioned in this Manual will be considered a
case of misuse. The user and not the man-
ufacturer shall be liable for any damage or
injury resulting from such cases of misuse. To
use this tool properly, you must observe the
safety regulations, the assembly instructions
and the operating instructions to be found in
this Manual.
M ake sure the screwdriver bit is the correct
size and is in good condition.
Do not abuse power tools. Abusive
practices can damage the tool and the
workpiece.
Do not attempt to modify tools or create ac-
cessories. Any such alteration or modification
is misuse and could result in a hazardous