65
Attaching ballast weights to the stabilisers
Outdoors
In enclosed spaces
Length L = 2,00 m
Length L = 2,50 m
A
B
C
D
Standing
height in m
Position
Position
A
B
C
D
A
B
C
D
1,0
0
0
0
0
0
0
0
0
Scaffolds assembled in this configuration must not be any higher!
Attaching ballast to scaffolds without stabilisers/outriggers
with castors
Ballast use for STABILO 10 – width 0.75 m, length 2.00 m and 2.50 m, indoor and
outdoor
4.6 Attaching the ballast
Fee-standing scaffold towers have to be weighed down with ballast weights attached to
the stabilisers in order to make sure that they are stable. The number of ballast weights to
be used depends on the height of the scaffold tower and are specified in the table below.
Содержание 731302
Страница 12: ...12 Kennzeichnung Das Typenschild ist an den Vertikalrahmen des STABILO Fahrger st Systems angebracht...
Страница 24: ...24 Die Abbildung zeigt das fertig montierte Ger st fahrbare Arbeitsb hne mit einer Arbeitsh he von 6 40 m...
Страница 62: ...62 The image below shows a fully assembled scaffold tower with a working height of 6 40 metres...