48
come into contact with persons working on the scaffold (mobile working platform) and
that such persons have sufficient freedom of movement when holding objects in their
hands. Safety distances in accordance with VDE 0105-100.
Safety distance 1 m
for rated voltages up to 1000 V
Safety distance 3 m
for rated voltages greater than 1 kV to 110 kV
Safety distance 4 m
for rated voltages greater than 110 kV to 220 kV
Safety distance 5 m
for rated voltages greater than 200 kV to 380 kV
If it is not possible to observe these safety distances, power lines must be isolated or discon-
nected and protected from being reconnected in consultation with the operator or owners.
3.6 Additional safety instructions (only for Germany)
The assembly, inspection and use of the scaffold tower (mobile working platform)
described in this document is also subject to the recommendations laid out in
– DGUV Information Sheet 201-011 (formerly BGI 663) „Instructions for working with
working and protective scaffolds“.
The use of electrical devices on the scaffold tower (mobile working platform) described in this
document is subject to the recommendations laid out in DGUV Information Sheet 203-004
(formerly BGI 594) „Use of electrical equipment in highly hazardous electrical locations“.
4. Structure
4.1 General information
Personnel must read the product information (section 2) and safety instructions (section
3) in full before assembling the scaffold tower (mobile working platform). Assembling
and disassembling the scaffold (mobile working platform) requires at least 2 persons.
Make sure that all of the components and tools required for assembling the scaffold are
available and that the components are free from damage before commencing assembly.
Only use original parts in compliance with the manufacturer‘s instructions.
INFORMATION ON USING THE ASSEMBLY INSTRUCTIONS
The Assembly Instructions describe how to assemble the STABILO system in a number
of different configurations. Please read the entire assembly instructions before assembly
and take note of the differences between the different assembly options. Please refer to
the drawings on pages 70 to 73 for information on how to attach the diagonal braces.
The scaffold (mobile working platform) may have to be fitted with ballast weights or out
-
riggers to make it more stable depending on the height of the top platform. Please refer
to the corresponding information at the end of this manual for more information on this.
Содержание 731302
Страница 12: ...12 Kennzeichnung Das Typenschild ist an den Vertikalrahmen des STABILO Fahrger st Systems angebracht...
Страница 24: ...24 Die Abbildung zeigt das fertig montierte Ger st fahrbare Arbeitsb hne mit einer Arbeitsh he von 6 40 m...
Страница 62: ...62 The image below shows a fully assembled scaffold tower with a working height of 6 40 metres...