Kranzle Ventos 25, Руководство по эксплуатации

Страница: 7 / 40

7
Description
Suction hose
The standard suction hose (1) is 3.5 m long and has a coupling at both
ends. The larger coupling is fitted into the suction opening (4) of the
vacuum. The somewhat thinner coupling is used to accommodate the
suction nozzles or to connect the suction pipe.
The couplings can be removed more easily from
the vacuum or nozzle by light turning and pulling.
Motor protection
To prevent overheating, the motor has a temperature overload switch which
cuts out the motor automatically if a critical temperature is reached.
If the overload switch cuts out the motor, the motor must be allowed to cool
down for approx. 5 minutes before restarting.
A customer service workshop should be contacted if the motor does not
restart automatically.
Component replacement and inspection work may only be
performed by trained personnel, with
the eqipment
disconnected from the power mains ie, with the plug
removed from the power socket .
Electrical connection
The cleaner is supplied with a 7.5 m power cable and plug.
The plug must be put into a properly fitted
power socket. The voltage on the
specification plate must match that of the
power source.
The socket must be protected by a
16 A slow-acting fuse .
When using an extension cable the
connections must be correct. Plug-type
connections must be splashproof and may
not lie on a wet or moist surface.
220 V -
240 V