Kramp MT-Pro+, Руководство оператора

Страница: 8 / 11

EN
Operation
8
BATTERY
Battery level can be checked. Replace battery if battery level is low.
The tester is powered with two 9 volt alkaline batteries. The left battery (A) powers the
backlight circuit. The right battery (B) powers the system.
The tester will display a percentage of battery life left in both
the system and backlight batteries.
The tester system functions will operate if no backlight
battery is installed or if it is low.
NOTE: When you first turn on the tester if the systembattery
is at or below 5% the tester will automatically flash the
battery life on the display to let you know thebattery needs
to be replaced. If the backlight battery is fresh and the
system battery needs replacing, the backlight battery can
be used to operate the system by moving it to the system
battery location.
LCD CONTRAST
The tester’s display contrast can be adjusted from 50% to 100%. Adjust the contrast
with the up/down buttons and confirm with ente.
PERSONALIZING AND UPDATING THE TESTER
1. The tester is equipped with a USB port and when connected to a computer
will allow diagnostics and updates to its software and grain calibrations.
2. Visit our website to use your USB port for personalization (adding user
name), grain scale, firmware and diagnostic updates
A B