Kramer WP-577VH, Руководство пользователя, Страница: 46 / 51

42 WP-577VH - Protocol 3000
Command - SECUR Command Type - Authentication
Command Name Permission Transparency
Set:
SECUR
Administrator Public
Get: SECUR? Not Secure Public
Description Syntax
Set: Start/stop security
# SECUR
␠
security_mode
␍
Get: Get current security state
# SECUR?
␍
Response
Set: ~nn @SECUR
␠
security_mode
␠
OK
␍␊
Get: ~nn @SECUR
␠
security_mode
␍␊
Parameters
security_mode
– 1/ON - enables security, 0/OFF - disables security
Response Triggers
Notes
The permission system works only if security is enabled with the
“SECUR” command
Command - SIGNAL Command Type - System
Command Name Permission Transparency
Set: - - -
Get SIGNAL? End User Public
Description Syntax
Set: - -
Get: Get input signal lock status
# SIGNAL?
␠
inp_id
␍
Response
~ nn@ SIGNAL
␠
inp_id,status
␍␊
Parameters
inp_id - input number
status - lock status according to signal validation
Response Triggers
After execution, a response is sent to the com port from which the Get was received
Response is sent after every change in input signal status ON to OFF, or OFF to ON
Notes