Kramer WP-577VH, Руководство пользователя, Страница: 23 / 51

WP-577VH - Configuring and Maintaining the WP-577VH 19
19
8 Configuring and Maintaining the WP-577VH
This chapter describes configuring and maintaining the WP-577VH and
comprises:

Setting the configuration DIP-switch (see Section
6.1
)

Updating the firmware (see Section
6.1
)
8.1 Setting the Configuration DIP-switch
The 4-way dip-switch provides the ability to configure a number of device
functions. Push a switch down to turn it on or up to turn it off.
Note : The device must be power-cycled whenever a change is made to the
switches.
Figure 8: The Configuration DIP-switch
# Feature Function DIP-switch
1 Audio Mode
Auto/Manual Sets the audio selection mode, (see table
below).
Note : This setting has no effect when the PC
graphics source is selected
On
—Auto
Off
—Manual
2 Video Mode
Auto/Manual Sets the video selection mode On
—Auto
Off
—Manual
3 Input Priority Mode Sets the video input automatic selection.
Note : This selection is available only if DIP-
switch 2 is set to Auto
On
—Priority
Off
—Last connected
4 Audio Mode Manual Sets the audio selection mode, (see table
below) On
—Force embedded
Off
—Force analog
5 Lock EDID
Locks the current EDID. When unlocked the
EDID is acquired normally
On
—Lock
Off
—Unlock
6
For future use 7
8