Kramer WP-577VH, Руководство пользователя, Страница: 17 / 51

WP-577VH - Principles of Operation 13
13
This priority remains in force until any of the following occurs:

A Protocol 3000 command is sent

The input signals/connections change
6.2 Input Connection Timeout
The default delay when switching to a new source when either the active source is
lost or a new source is connected is three seconds. The delay when the active
source is lost or a new signal is connected can be changed independently using
the relevant Protocol 3000 command, (see Section
11.2
).
When the active source is lost, the delay can be set to between 3 seconds and
unlimited. When a new signal is connected, the delay can be set to between 0
seconds (immediate) and unlimited.
6.3 Audio Signal Priority
The device can automatically detect an analog audio signal.
The audio selection mode is set using the DIP-switches (see Section
8.1
) based
on the following table.
DIP-switch #1 DIP-switch #4 Analog Audio Present Audio Used
On Not relevant Yes Analog
No HDMI
Off On Not relevant HDMI
Off Off Yes Analog
No Analog (=mute)
Note : During prolonged periods with no audio (10 seconds), the device may
interpret this as having no analog audio present and therefore switch back to the
embedded audio. To prevent this from occurring set audio selection to manual.
Note : Audio is transmitted even in the absence of video.