Step 3: Install the WP-211X
Insert the device into the in-wall box (note that first you need to connect the HDBT cable and power) and connect the parts as
shown in the illustrations below:
US-D Version
EU/UK Version
DECORA® design or similar frames are included in US-D models. DECORA® is a registered
trademark of Leviton Manufacturing Co., Inc.
We recommend that you use any of the following standard 1 Gang in-wall junction boxes (or their equivalent):
•
US-D
: 1 Gang US electrical junction boxes.
•
EU
: 1 Gang in-wall junction box, with a cut-hole diameter of 68mm and depth that can fit in both the device and the
connected cables (DIN 49073).
•
UK
: 1 Gang in-wall junction box, 75x75mm (W, H) and depth that can fit in both the device and the connected cables
(BS 4662 or BS EN 60670-1 used with supplied spacers and screws).
Step 4: Connect the inputs and outputs
Always switch OFF the power on each device before connecting it to your
WP-211X
. For best results, we recommend that you
always use Kramer high-performance cables to connect AV equipment to the
WP-211X
.
