Kramer WP-121, Руководство пользователя, Страница: 11 / 15

Capturing the EDID
9
9
6 Capturing the EDID
The EDID can either be captured automatically by the WP-121 transmitter, or you
can set it manually with one of the preconfigured values (see Table 5 ).
Figure 9: WP-121 PCB Assembly Front View with Face Plate Removed
Table 5: WP-121 PCB Assembly Features
# Feature Function
1 16 Position Rotary Switch Turn to select the EDID resolution and refresh rate (see Table 6 )
2 EDID Capture Button Press to capture the EDID
3 EDID Status LED Flashes slowly when capturing a valid display EDID,
Lights solid when EDID has been successfully captured,
Flashes rapidly when setting a preconfigured EDID
6.1 Capturing the EDID from a Display Device
To capture the EDID from a display device:
1. Using a Philips screwdriver, remove the four screws holding the faceplate to
the PCB assembly.
2. Using a short cable
1
3. Ensure that the rotary switch (see
, connect the PC IN input 15-pin HD connector on the
WP-121
to the XGA connector of the display and turn the display on.
Figure 9 ) is in position 0. If it is not, use a
small screwdriver to turn it to 0.
1 For example, Kramer model number C-MGM/MGM-1