Kramer WP-121, Руководство пользователя, Страница: 10 / 15

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Installing and Connecting the WP-121
8
5.4 Wiring the TP Line Output Connectors
5.4.1 Wiring the RJ-45 Line Output Connector
Table 4 and Figure 7 define the STP pinout using a straight through cable with
RJ-45 connectors. Connect/solder the cable shield to the connector shield.
Table 4: TP Connector Pinout
36 78 12 5 4
1 45 78 6 3 2
Figure 7: TP Connector
EIA /TIA 568A EIA /TIA 568B
PIN Wire Color PIN Wire Color
1 Green/White 1 Orange/White
2 Green 2 Orange
3 Orange/White 3 Green/White
4 Blue 4 Blue
5 Blue/White 5 Blue/White
6 Orange 6 Green
7 Brown/White 7 Brown/White
8 Brown 8 Brown
Pair 1 4 and 5 Pair 1 4 and 5
Pair 2 3 and 6 Pair 2 1 and 2
Pair 3 1 and 2 Pair 3 3 and 6
Pair 4 7 and 8 Pair 4 7 and 8
5.4.2 Wiring the 9-Pin Terminal Block Line Output Connector
The 9-pin terminal block is a plug-in connector for attaching the STP cable. Follow
the colors of the color-coded sticker on these terminals for proper connection of the
cable.
Figure 8 defines the pinouts for the terminal block.
Figure 8: Terminal Block Pinouts
Notes :
• Use the connector clips only when removing wires, not when inserting them
• Each wire should protrude 9mm (0.35") from the plastic insulation so that it
can be easily connected. To prevent the wires crossing, be sure that each wire
is fully inserted