VS-88FO
-
Operating the VS-88FO
25
6.1.9
Switching Protocols
You can operate the
VS-88FO
using either the KRAMER 2000 or the default
KRAMER 3000 serial protocol.
To choose the Kramer 2000 protocol instead of the default Protocol 3000,
press OUT 1 and OUT 2 at the same time.
OUT 1 flashes briefly if the change was made correctly
To revert to the Kramer 3000 protocol, press OUT 1 and OUT 3 at the same
time.
OUT 1 flashes briefly if the change was made correctly
If an error is indicated, retry the previous action or choose a new action.
6.2
Using Serial Commands
To operate the
VS-88FO
using serial commands, Kramer provides free control
software that you can download from the Kramer Electronics Web site.
For an explanation of all KRAMER 3000 commands, see
Section
9
For an explanation of all KRAMER 2000 commands, see
Section
10
6.3
Using the Infrared Remote Controller
To operate the
VS-88FO
using the
RC-IR3
infrared remote controller, see the User
Manual packed with the remote controller.
See also the Kramer Web site:
www.kramerelectronics.com.
Note
:
You cannot change genlock timing from the remote control, only from the
front panel.
The IR remote controls only 8 preset configurations equivalent to OUT 1 to
OUT 8
