Connecting a VS-81DVI-R 8x1 DVI Switcher
13
Figure 7: The Ethernet Configuration Manager Window
Table 6: Ethernet Configuration Manager Window Functionality
#
Feature
Function
File
The
Exit
command closes the Configuration Manager application
Action
The
Search Board
command seeks the
VS-81DVI-R
device that connects to the PC via
the ETHERNET port, and displays it and its corresponding settings;
The
Config
command adjusts the
VS-81DVI-R
according to the displayed data
Set MAC
1
For factory use only (click the
Password
command to enter the password)
1
M
en
u
ba
r
About
Displays software information, including the software version
2
Device List
Displays the MAC Address
3
Progress Bar
Shows the progress
4
Status Bar
Shows the status
5
Version
Displays the firmware version
6
Device Network
Settings Area
DHCP
1
Mode
Check Box: When selected, configures the Ethernet port to obtain an IP
address automatically from the DHCP server. When cleared, manual configuration of
the Ethernet port is required to obtain an IP address (Static IP)
IP Address
:
A 32-binary digit number obtained from your Network Administrator that
identifies the Ethernet port that is currently being configured
Subnet
: A 32-binary digit number obtained from your Network Administrator, which
combined with the IP Address, identifies which network your device is on
Gateway
: A network position serving as an entry to another network or to the Internet
(only relevant in the Active Routing mode)
7
Exit Button
Closes the Configuration Manager application
8
Action Buttons
Search
: seeks the devices that connect to the PC via the ETHERNET port, and
displays them and their corresponding settings
Config
: adjusts the according to the displayed data
1 See the definition in Table 1