Connecting a VS-81DVI-R 8x1 DVI Switcher
7
6 Connecting a VS-81DVI-R 8x1 DVI Switcher
To connect the
VS-81DVI-R
8x1 DVI Switcher
(as illustrated in Figure 2), do
the following
1
:
1. Connect up to 8 DVI sources (for example, DVI computer graphics sources)
to the INPUT connectors.
2. Connect the OUTPUT connector to the DVI acceptor (for example, a DVI
display).
3. If required, connect a PC and/or controller to the RS-232 port (see section 6.1)
and/or the ETHERNET port (see section 6.2).
4. Connect the power connector to the mains electricity.
After turning on the power, press an INPUT SELECTOR button (1 to 8) to
choose which DVI input to route to the output
2
.
1 Switch OFF the power on each device before connecting it to your VS-81DVI-R. After connecting your VS-81DVI-R,
switch on its power and then switch on the power on each device
2 If the input is connected and active, the respective input button illuminates
