Kramer VS-48UHD, Руководство пользователя

Страница: 81 / 84

Kramer Electronics Ltd.
UHD Matrix Switcher
– Protocol 3000
79
Get: Get DHCP mode
#NET-DHCP? CR
Response
~nn @NET-DHCP SP mode CR LF
Parameters
mode
–
0
(Do not use DHCP. Use the IP address set by the factory or the
NET-IP
command),
1
(Try to
use DHCP. If unavailable, use the IP address set by the factory or the
NET-IP
command)
Notes
Connecting Ethernet to devices with DHCP may take more time in some networks.
To connect with a randomly assigned IP by DHCP, specify the device DNS name (if available) using the
NAME
command. You can also get an assigned IP by direct connection to USB or RS-232 protocol port if
available.
Consult your network administrator for correct settings.
K-Config Example
Enable DHCP mode, if available:
“#NET - DHCP 1”,0x0D
NET-GATE
Functions Permission Transparency
Set:
NET-GATE
Administrator Public
Get:
NET-GATE?
End User Public
Description Syntax
Set: Set gateway IP
# NET-GATE SP ip_address CR
Get: Get gateway IP
# NET-GATE? CR
Response
~nn@ NET-GATE SP ip_address CR LF
Parameters
ip_address
– Gateway IP address, in the following format:
xxx.xxx.xxx.xxx
Notes
A network gateway connects the device via another network, possibly over the Internet. Be careful of
security problems. Consult your network administrator for correct settings.
K-Config Example
Set the gateway IP address to 192.168.0.1:
“#NET - GATE 192.168.000.001”,0x0D
NET-IP
Functions Permission Transparency
Set:
NET-IP
Administrator Public
Get:
NET-IP?
End User Public
Description Syntax
Set: Set IP address
# NET-IP SP ip_address CR
Get: Get IP address
# NET-IP? CR
Response
~nn@ NET-IP SP ip_address CR LF
Parameters
ip_address
– IP address, in the following format:
xxx.xxx.xxx.xxx
Notes
Consult your network administrator for correct settings.
K-Config Example
Set the IP address to 192.168.1.39:
“#NET - IP 192.168.001.039”,0x0D