Kramer VS-48UHD, Руководство пользователя

Страница: 71 / 84

Kramer Electronics Ltd.
UHD Matrix Switcher
– Protocol 3000
69
BAUD
Functions Permission Transparency
Set:
BAUD
Administrator Public
Get:
BAUD?
Administrator Public
Description Syntax
Set:
Set protocol serial port baud rate
#BAUD SP baud_rate CR
Get:
Get protocol serial port baud rate
(for current baud rate)
#BAUD? CR
Response
~
nn @BAUD SP baud_rate CR LF
~
nn @BAUD SP current_baud_rate CR LF
Parameters
baud_rate
–
9600
,
115200
,
else
(New baud rate to set)
current_baud_rate
–
9600
,
115200
,
else
(Current protocol serial port baud rate)
Notes
The new defined baud rate is stored in the EEPROM and used when powering up
Default baud rate is 115200 (on factory reset).
Only works with devices supporting this command (if
ERR 002 is returned, the default baud rate is used).
K-Config Example
Set the baud rate to 9600:
“#BAUD 9600”,0x0D
HDCP-STAT
Functions Permission Transparency
Set:
-
- -
Get
HDCP-STAT?
End User Public
Description Syntax
Set: None -
Get: Get HDCP signal status
# HDCP-STAT? SP stage,stage_id CR
Response
~nn@ HDCP-STAT SP stage,stage_id,status CR LF
Parameters
stage
–
0
(Input),
1
(Output)
stage_id
– For input stage:
1
(IN 1),
2
(IN 2),
3
(IN 3),
4
(IN 4),
5
(IN 5),
6
(IN 6),
7
(IN 7),
8
(IN 8),
0
(Output disconnected); For output stage
1
(OUT 1),
2
(OUT 2),
3
(OUT 3),
4
(OUT 4),
5
(OUT 5),
6
(OUT
6),
7
(OUT 7),
8
(OUT 8),
*
(All outputs)
status
– Signal encryption On/Off status:
0
(HDCP Off),
1
(HDCP On),
2
(Follow input),
3
(Mirror output
(Mac mode))
Response Triggers
Response is sent to the com port from which the Set (before execution) / Get command was received.
Response is sent to all com ports after execution if
HDCP-STAT
was set by any other external control device
(button press, device menu and similar) or HDCP mode changed.
Notes
On output
– sink status.
On input
– signal status.
K-Config Example
Get the output HDCP-STATUS of IN 1 (HDCP Off):
“#HDCP - STAT? 0,1”,0x0D