Kramer Electronics Ltd.
VS-44H2A
– Defining VS-44H2A 4K HDMI 4x4 Matrix Switcher
4
Defining VS-44H2A 4K HDMI 4x4
Matrix Switcher
This section defines the
VS-44H2A
.
Front Panel
Figure 1: VS-44H2A 4K HDMI 4x4 Matrix Switcher Front Panel
The behavior of the front panel buttons and the 7-segment display changes along with the
operation modes. For further details see
Operating VS-44H2A via Front Panel Buttons
#
Feature
Function
IR Sensor
Receives signals f rom the inf rared remote-control transmitter.
IR LED
Lights yellow when receiving an IR signal.
ALL Button
Press to perf orm an action on all outputs.
For switching, press ALL and then a specif ic INPUT button to route the
selected input to all outputs. For example, press ALL and then IN 2 to route
input 2 to all the outputs (see
Routing All Outputs to a Single Input
on page
).
OFF Button
Press af ter pressing an OUT Button (1 to 4)
to disconnect the selected
output f rom the inputs.
To disconnect all the outputs, press ALL f ollowed by OFF (see
on page
IN Buttons (1 to 4)
Press to select the input to switch af ter selecting an output (also used f or
storing machine setups in the STO-RCL (see
on page
).
OUT Buttons
(1 to 4)
Press to select an output (1 to 4) to which the input is routed. Also used f o r
storing machine presets.
STO Button
Press
STO
f ollowed by an
IN
button (1 to 4) to store the current switching
conf iguration to the location corresponding to that INPUT number
(see
Storing and Recalling a Routing Setup
on page
).
RCL Button
Press
RCL
f ollowed by the corresponding
IN
button (1 to 4) to recall the
preset switching conf iguration saved in that location (see
).
LOCK Button
Press and hold to toggle between locking and releasing the f ront panel
buttons.
EDID Button
Press EDID + STO buttons to enter the EDID mode (see
EDID on page
OUTPUT/INPUT
7-segment LED
Display
Displays the selected inputs switched to the outputs (marked above each
input).
1
2
3
5
4
5
6
7
8
9
10
