Kramer Electronics Ltd.
VS-42H2
– Using Embedded Web Pages
16
You can also configure
VS-42H2
via Protocol 3000 commands (see
VS-42H2
web pages enable performing the following:
•
Routing and Setting the Inputs and Outputs
•
•
•
•
Routing and Setting the Inputs and Outputs
Use Routing page to perform the following actions:
•
Switching an Input to an Output
•
•
Locking and Unlocking Controls
Switching an Input to an Output
To switch an Input to an Output:
1. Click
Routing
on the Navigation List.
The Routing page appears.
Figure 11: The Routing Page
2. Click
Output1
or
Output2
.