Kramer VS-41H, Руководство пользователя

Страница: 11 / 21

Connecting a VS-41H 4x1 HDMI Switcher
9
6 Connecting a VS-41H 4x1 HDMI Switcher
To connect the VS-41H 4x1 HDMI Switcher (as illustrated in Figure 2 ), do
the following
1
1. If required:
:

Set the appropriate INPUTS to the DVD mode (see section
7.1 )

Acquire the EDID (see section 7.2 )
2. Connect
2
the HDMI sources as follows
3

A multimedia player to INPUT 1
:

A set top box to INPUT 2

A DVD player to INPUT 3

A DVD player to INPUT 4
3. Connect the OUTPUT HDMI connector to an HDMI acceptor (for
example, a plasma display).
4. If required, connect a PC and/or controller to the RS-232 port (see section
7.3 ) and/or the ETHERNET port (see section 7.4 ).
5. Connect the power connector to the mains electricity (not shown in
Figure 2 ).
Press an INPUT SELECTOR button (from 1 to 4) to choose which HDMI
input to route to the output.
1 Switch OFF the power on each device before connecting it to your VS-41H After connecting your VS-41H, switch on its
power and then switch on the power on each device
2 You do not have to connect all the HDMI sources
3 Alternatively, you can connect a PC to any of the inputs and set those inputs to the PC mode (see section 7 1 )