KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the Configuration Menus
26
Note:
This is not the setup that is loaded when the unit is switched on.
To store the current setup as the default setup:
1. Press MENU twice.
The following message is displayed:
start configuration menu
MENU to view setup ENT to change them
2. Press MENU until the following is displayed:
store DEFAULT setup
press ENTER to store
3. Press ENT to store the current configuration as the default configuration.
The following is displayed:
current matrix stage is OKAY?
press TAKE to confirm
4. Press TAKE.
The following is displayed:
current matrix stage
store as DEFAULT setup
This indicates that the current setup is stored as the default setup. After a few
seconds the next option on the Config Menu is displayed.
8.2.7 Config Menu—Total Matrix Reset
This option lets you turn all outputs off or reset the unit to its factory default settings.
To reset the matrix setup:
1. Press MENU twice.
The following message is displayed:
start configuration menu
MENU to view setup ENT to change them
2. Press MENU until the following is displayed:
TOTAL MATRIX RESET
exit = ESC ENT = submenu
3. Press ENT to enter the Reset Submenu.
The following is displayed:
COMPLETELY MATRIX RESET
1:ALL outputs OFF 2:Factory default
4. Press 1 to turn off all outputs or 2 to perform a factory reset of all options.
Caution:
Selecting option 2 to perform a factory default reset clears all setups,
options and configuration.
5. Press TAKE and wait a few seconds.
The following is displayed: