![background image](http://html.mh-extra.com/html/kramer/vs-16a/vs-16a_user-manual_2002065011.webp)
KRAMER ELECTRONICS LTD.
10
10.2
Audio Signal
Problem Remedy
No audio at the output
device, regardless of
input selected
1. Confirm that your sources and output device are turned on and connected
properly. Audio signals connected to the input of your switcher should be
properly wired to the output of your source. Audio signals connected to
the output of your switcher should be properly wired to the input of your
switcher or acceptor.
2. Confirm that any other switchers in the signal path have the proper input
and/or output selected. Pay special attention to input switchers that may be
built into your switchers or recording device.
Audio level is too low
1. Confirm that the connecting cables are of high quality and properly built.
2. Check level controls located on your source input device or output device.
LIMITED WARRANTY
Kramer Electronics (hereafter Kramer) warrants this product to be free from defects in material and workmanship under the
following terms.
HOW LONG IS THE WARRANTY
Labor and parts are warranted for three years from the date of the first customer purchase.
WHO IS PROTECTED
Only the first purchase customer may enforce this warranty.
WHAT IS COVERED AND WHAT IS NOT COVERED
Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered
by the warranty:
1) Any product which is not distributed by Kramer or which is not purchased from an authorized Kramer dealer. If you
are uncertain as to whether a dealer is authorized, please contact Kramer at one of the agents listed in the web site
www.kramerelectronics.com
.
2) Any product, on which the serial number has been defaced, modified or removed.
3) Damage, deterioration or malfunction resulting from:
a) Accident, misuse, abuse, neglect, fire, water, lightning or other acts of nature, unauthorized
product modification, or failure to follow instructions supplied with the product.
b) Repair or attempted repair by anyone not authorized by Kramer.
c) Any shipment of the product (claims must be presented to the carrier).
d) Removal or installation of the product.
e) Any other cause, which does not relate to a product defect.
f) Cartons, equipment enclosures, cables or accessories used in conjunction with the product.
WHAT WE WILL PAY FOR AND WHAT WE WILL NOT PAY FOR
We will pay labor and material expenses for covered items. We will not pay for the following:
1) Removal or installations charges.
2) Costs of initial technical adjustments (set-up), including adjustment of user controls or programming. These costs are
the responsibility of the Kramer dealer from whom the product was purchased.
3) Shipping
charges.